Steckergehäuse für Buchsenkontakte, 12-polig , A-Codierung / ATM06-12SA
- Amphenol-Tuchel Industrial GmbH
- 0,011 kg
Lager 1: Stück
- Lieferzeit Lager 1 wenn lagernd 1-3 Werktage
Lager 2: Stück
- Lieferzeit Lager 2 wenn lagernd 5-7 Werktage
Lieferzeit ca. 3 Werktage
Alle Preise zzgl. gesetzlicher USt. und Versandkosten.
Mindermengenzuschlag von 8,- € bei Bestellungen unter 50,- € netto Warenwert.
ATM Series™2, 3, 4, 6, 8 and 12 positions available
- 16-22AWG, 7.5A, Size 20
- High-performance, cost-effective
- Superior environmental seal retention
- Compatible with existing standard products industry-wide.
ATM Series™ connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications, while still maintaining the strengths of the AT Series™ product line.
The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection. Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV resistance, dielectric/mechanical properties and environmentally RoHS compliant. The sealing system is comprised of an internal and rear silicone, multi-sealing perimeter against environmental ingress. Contacts are derived from quality copper alloy to ensure an electrically-reliable connection.
ATM Series™ connectors are compatible with other existing standard products industry-wide.
|Features & Benefits|
|Current Capacity||Size 20, 7.5A (max)|
|Wire Range||Size 20 contacts will accept wire ranges of 16 thru 22AWG|
|Temperature||Operating temperature range: -55°C to +125°C at rated current|
|Dielectric Value||Meets or exceeds 1500 volts minimum|
|Drop Test||Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times|
|Shock||No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)|
|Vibration||Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)|
|Connector Terminal Retention||When subjected to a direct pull, contacts achieve a minimum pull-out force of 89 lbs.|
|Connector Retention||A mated connector subjected to a pulling force by the exiting wire bundle at 89 lbs. times the number of contacts to a maximum of 356 lbs. applying load for 30 seconds|
|Thermal Shock||Subjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damage detrimental to the normal operation of the connector|
|Insulation Resistance||1000 megohms minimum at 25°C|
|Mating Cycle Durability||Following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident|
|Contact Millivolt Drop||Size 20 (stamped & formed) contacts with 20AWG conductor - 60 mV (solid contact) drop max; 100 mV (stamped & formed contact) drop max at 7.5A test current|
|Water Immersion||A mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of water of 1 meter for 4 hours without loss of electronic performance|
|Contacts||Copper Alloy, Nickel Plated, Gold optional|
Wedgelocks are required for all plugs.
- Data Sheet: ATM06-12SA.pdf
- Catalogue A Series: A_Series_Catalogue.pdf
- Katalog A-Serie: A-Serie_Katalog.pdf